Wet saws

Post Reply
Wariatth
Posts: 1
Joined: Sun May 19, 2019 5:29 pm

Wet saws

Post by Wariatth » Sun May 19, 2019 5:31 pm

Is there any wet tile saw that bends both sides on the 45 angle?

User avatar
A. Spruce
Posts: 5713
Joined: Tue Aug 16, 2016 5:23 pm
Location: California, USA

Re: Wet saws

Post by A. Spruce » Sun May 19, 2019 5:49 pm

Pro wet saws simply have a trolley bed that move in and out from the blade, the angle is whatever you hold the tile at. Cheaper DIY versions are more like a tablesaw with a fixed bed/blade and you use a fence or miter gauge to guide the cut, again, how you hold the tile in relation to the saw is how it's going to cut, there is no "bend", swivel, or tilt, which are characteristics of a miter saw, NOT a tile saw.
If the women don't find you handsome, they should at least find you handy.

User avatar
Shannon
Posts: 12512
Joined: Fri Nov 25, 2011 11:58 pm
Location: Canada
Contact:

Re: Wet saws

Post by Shannon » Mon May 20, 2019 9:52 am

Yup I agree and most better saws with the motor above the table will allow the head of the saw to tilt one way as well.
If you've found our videos or website information helpful, please considering making a donation using PayPal or pledging us on Patreon

Post Reply