Faucet thread pipe is too narrow

Ask your bathroom related questions here
Post Reply
Leftside
Posts: 128
Joined: Mon Mar 30, 2015 6:30 am

Faucet thread pipe is too narrow

Post by Leftside » Thu Mar 21, 2019 8:48 am

So I replaced a bathroom sink faucet and the threaded pipe is very narrow compared to the drilled hole. It tends to move when you use it despite how hard I tighten it. What can I do to make it more snug besides replace the faucet with a better sized one?

Thanks

User avatar
A. Spruce
Posts: 5702
Joined: Tue Aug 16, 2016 5:23 pm
Location: California, USA

Re: Faucet thread pipe is too narrow

Post by A. Spruce » Thu Mar 21, 2019 8:53 am

Sounds like you don't have the ability to tighten it enough, meaning not enough threads on the hold down apparatus. Stack some washers or make a spacer to fit between the nut and hold down clamp, that should do the trick.
If the women don't find you handsome, they should at least find you handy.

User avatar
Shannon
Posts: 12498
Joined: Fri Nov 25, 2011 11:58 pm
Location: Canada
Contact:

Re: Faucet thread pipe is too narrow

Post by Shannon » Thu Mar 21, 2019 8:59 am

Ya the threaded tubes are always much smaller. If you are trying to apply it to the sink only (without and counter top in-between) sometimes they are not easy to tighten like Spruce said. Add some spacers and give it a try.
If you've found our videos or website information helpful, please considering making a donation using PayPal or pledging us on Patreon

Post Reply