bathroom tub enclosure

Ask your bathroom related questions here
Post Reply
JoNor
Posts: 1
Joined: Mon Apr 08, 2019 1:10 pm

bathroom tub enclosure

Post by JoNor » Mon Apr 08, 2019 1:24 pm

Installing a shower door in a tube enclosure. The door threshold does not seat tightly to the bottom of the tub. The horizontal surface of the tub is not level. It dips down about 1/8" for most of the length of the tube leaving a 1/8" gap between the top of the tub and the bottom of the aluminum threshold. How do I close the gap. If one were to step on the threshold, the only vertical support would be the caulking - not good. Thank you for your help.
Homeimproements.com

Attached are some pictures of the condition.

[email protected]
Attachments
L1090085.JPG
L1090085.JPG (1.13 MiB) Viewed 104 times
L1090084.JPG
L1090084.JPG (1.15 MiB) Viewed 104 times
L1090083.JPG
L1090083.JPG (1.07 MiB) Viewed 104 times
L1090081.JPG
L1090081.JPG (933.18 KiB) Viewed 104 times
L1090080.JPG
L1090080.JPG (1.12 MiB) Viewed 104 times

User avatar
Shannon
Posts: 12516
Joined: Fri Nov 25, 2011 11:58 pm
Location: Canada
Contact:

Re: bathroom tub enclosure

Post by Shannon » Mon Apr 08, 2019 4:23 pm

Would you be able to file the two ends at all to make it sit any lower? I can't tell from your pictures what profile the bottom track is or if you would gain anything from doing that?
If you've found our videos or website information helpful, please considering making a donation using PayPal or pledging us on Patreon

User avatar
A. Spruce
Posts: 5716
Joined: Tue Aug 16, 2016 5:23 pm
Location: California, USA

Re: bathroom tub enclosure

Post by A. Spruce » Mon Apr 08, 2019 5:05 pm

The bottom track is simply a guide for the doors, it's ok to make it contour to the tub. As Shannon said, sometimes you need to file the end to the same rounded contour of the corner to get the best fit.
If the women don't find you handsome, they should at least find you handy.

Post Reply