Ask your questions pertaining to the interior that don't fit in the above categories
2 posts • Page 1 of 1
Hey Shannon and the gang, I was relooking over things in my basement before I get Sprayfoam and drywall in, and I noticed that when I framed this section of wall the gap is roughly 2 5/8” from the bottom pt plate to the bottom of the wall plate. I plan on using roughly 4” baseboard and a thin sub floor (dmx airflow or something similar) will this gap affect me in anyway and how would you secure baseboard on the floating walls? I remember seeing somewhere people using plywood strips as a backer to give it more structure. The other gaps in my basement are around 3/4 to the 1.5”. The floor varies bc of drainage I suppose.
- B79F06AC-79E0-47BB-9A7E-3C8409BE3C29.jpeg (156.67 KiB) Viewed 73 times
- 7C323F40-649C-4A75-B4C1-DE89A56A9B4B.jpeg (161.77 KiB) Viewed 73 times
If you can't nail into framing, install your baseboard nails at angles, this will give them bit into the drywall. Once it's caulked, it won't go anywhere. If you want a little added security, you can put dabs of caulk on the back of the baseboard to "glue" it to the wall in addition to the nails.
If the women don't find you handsome, they should at least find you handy.