Peeling Paint, just seal it?

Ask your questions pertaining to the interior that don't fit in the above categories
Post Reply
BrokeIt
Posts: 2
Joined: Sun Dec 09, 2018 4:43 pm

Peeling Paint, just seal it?

Post by BrokeIt » Fri Apr 19, 2019 12:57 pm

The paint is peeling and chipping off the wall. Can I just seal over this with Zinnser Bin?
IMG_20190419_142105-600x800.jpg
IMG_20190419_142105-600x800.jpg (90.43 KiB) Viewed 144 times
IMG_20190419_142042-600x800.jpg
IMG_20190419_142042-600x800.jpg (55.13 KiB) Viewed 144 times
IMG_20190419_142130-600x800.jpg
IMG_20190419_142130-600x800.jpg (70.83 KiB) Viewed 144 times

User avatar
A. Spruce
Posts: 6148
Joined: Tue Aug 16, 2016 5:23 pm
Location: California, USA

Re: Peeling Paint, just seal it?

Post by A. Spruce » Fri Apr 19, 2019 1:29 pm

You shouldn't need to seal it, simply scrape off what is loose/peels easily, float it smooth with drywall topping compound, and you're ready for paint.
If the women don't find you handsome, they should at least find you handy.

Clarence
Posts: 174
Joined: Mon Mar 27, 2017 9:15 am

Re: Peeling Paint, just seal it?

Post by Clarence » Sat Apr 20, 2019 5:12 am

Looks like you have Plaster walls. High moisture will cause the problem as in the last picture.
If the house has been closed for a period of time with no temperature control paint will peel off plaster.

User avatar
Aaron
Posts: 3414
Joined: Sat Jan 03, 2015 4:03 pm
Location: St. Paul, MN

Re: Peeling Paint, just seal it?

Post by Aaron » Sat Apr 20, 2019 1:59 pm

Zinsser B-I-N is a great primer for that sort of thing, I think. It's a white pigmented shellac, and it covers stains and has amazing adhesion. I would use a coat of B-I-N first, let it dry, then put Zinsser Bulls Eye 1-2-3 primer over that before putting a couple topcoats over that.

If the old paint flaking off creates an undesirable appearance of an uneven surface, then Spruce's suggestion of topping is good. But first I would score the old plaster with a utility knife to create some tiny grooves so the topping compound can key into the plaster. Make like a 1 inch by 1 inch grid of grooves. Then delamination is less likely to occur in the future.

Post Reply