Best ways to get rid of mold

Ask your questions pertaining to the interior that don't fit in the above categories
Post Reply
Posts: 1
Joined: Tue Aug 14, 2018 4:25 am

Best ways to get rid of mold

Post by GaryJacob » Mon Aug 27, 2018 3:40 am

Mold often grows in wet places and cause health problems. These places usually has leakage or water damage. This is why it's important to fix these problems. Here's a procedure of one of the ways to get rid of black mold:
1) Take a bucket with warm water, and add 2 tablespoons of liquid dish soap. Dip a bristled brush into the soapy water and scrub the moldy surface with the brush. Repeat it until the area is cleaned.
2) Add an equal proportion of water and ammonia and pour this solution into a spray bottle. Spray the solution evenly on contaminated areas. Let it sit for 5-10 min. Use a brush if necessary, otherwise wipe it clean. Give more suggestions if you have any.

Posts: 5
Joined: Sun Nov 17, 2019 11:56 am

Re: Best ways to get rid of mold

Post by manthano » Sun Nov 17, 2019 12:35 pm

A 1% solution of sodium carbonate is commonly used. This is sold in BB stores under name "concorbium mold control," You can buy that for $10 or make your own for .05$. Your choice.
put solution in spray bottle, I use 2 gal sprayer bu a smaller works for small jobs.
Zinsser also has mold killing paint at reasonable cost.

Post Reply