Tile install thickness calculation

Ask your kitchen related question here
Post Reply
badali
Posts: 30
Joined: Mon Dec 10, 2018 6:49 am

Tile install thickness calculation

Post by badali » Sun Dec 30, 2018 3:43 pm

I am replacing the flooring between the kitchen and living area and am trying to get the new tile to be 1" thick including the underlayment. Subfloor is 3/4" plywood so I can use Ditra or cement board underlayment.

I've asked a few people and am getting mixed answers. Can someone please tell me if the following makes sense?

1/4" for cement board
1/8" for mortar under cement board
3/8" for 12x24 porcelain tiles
1/4" for tile mortar assuming I use a 1/2" square notch trowel.

Adding these up would put me at 1"

I suspect the mortar under the cement boards will be a bit less than 1/8" but probably close enough.

User avatar
A. Spruce
Posts: 5712
Joined: Tue Aug 16, 2016 5:23 pm
Location: California, USA

Re: Tile install thickness calculation

Post by A. Spruce » Sun Dec 30, 2018 4:02 pm

You're on the right track with your calculation, so long as your numbers are correct, meaning, until you have all the products you intend to use on site, you won't know exactly what the sum of the parts is going to be.
If the women don't find you handsome, they should at least find you handy.

User avatar
Shannon
Posts: 12511
Joined: Fri Nov 25, 2011 11:58 pm
Location: Canada
Contact:

Re: Tile install thickness calculation

Post by Shannon » Sun Dec 30, 2018 10:34 pm

Yup you should be real close. You can fudge things a little once you get going.
If you've found our videos or website information helpful, please considering making a donation using PayPal or pledging us on Patreon

Post Reply