Siding

Ask your questions regarding the exterior of your house - siding, roofing, etc.
Post Reply
Scott1974
Posts: 3
Joined: Sun Jun 03, 2018 6:39 pm

Siding

Post by Scott1974 » Sun Jun 03, 2018 6:45 pm

I have a Two story house I am putting up siding. I Got to a part where the top of the garage roof and the wall meet. I need to know how to get my Angle right. I know how to do the angles on the gable ends. But got lost on this part. Can you help me please.

Thanks for your time
Scott


User avatar
A. Spruce
Posts: 3950
Joined: Tue Aug 16, 2016 5:23 pm
Location: California, USA

Re: Siding

Post by A. Spruce » Mon Jun 04, 2018 12:29 am

Can you post a picture?
If the women don't find you handsome, they should at least find you handy.

Scott1974
Posts: 3
Joined: Sun Jun 03, 2018 6:39 pm

Re: Siding

Post by Scott1974 » Mon Jun 04, 2018 4:46 am

Attached is a picture
Attachments
7FB26BDB-E133-45C5-BB57-990263D4E5B4.jpeg
7FB26BDB-E133-45C5-BB57-990263D4E5B4.jpeg (172.68 KiB) Viewed 108 times

User avatar
Shannon
Posts: 10584
Joined: Fri Nov 25, 2011 11:58 pm
Location: Canada
Contact:

Re: Siding

Post by Shannon » Mon Jun 04, 2018 7:03 am

Snap a piece into that piece you have installed and then set another scrap into the J channel. Trace the angle of the piece in the J channel onto the one snapped into place on the wall and that will give you a template of the angle you need.
If you've found our videos or website information helpful, please considering pledging us on Patreon

Scott1974
Posts: 3
Joined: Sun Jun 03, 2018 6:39 pm

Re: Siding

Post by Scott1974 » Mon Jun 04, 2018 8:37 am

I will do that Shannon thank you for your advice. Think by chance you will make a video for YouTube of this and put it up I’ve looked for it on YouTube everywhere for this issue and no one has ever made a video on that. Thanks for your time.

User avatar
Shannon
Posts: 10584
Joined: Fri Nov 25, 2011 11:58 pm
Location: Canada
Contact:

Re: Siding

Post by Shannon » Mon Jun 04, 2018 6:38 pm

That may be something we can look at for sure.
If you've found our videos or website information helpful, please considering pledging us on Patreon

Post Reply